Get help on TP-Link Extender Setup related issues!

Configure TP-Link Extender and get access to seamless internet at all corners.

TP-Link Extender Setup does not have to be a hassle. That’s why we assist you with the complete setup process along with the tp link wireless extender login as well, to equip you with complete knowledge of the device functionality.

How does a TP-Link Range extender work?

Range extenders like the TP-Link extender here, work by receiving the wireless signal from the router and retransmitting the same to the areas considered as dead zones.

An advantage of using a TP-Link extender is the ease of setup. However, you do have to keep in mind that the extender position matters a lot.

Selecting the right location for your TP-Link extender is crucial. It is wise to keep the TP-Link device at a central place and closer to your existing router. Always install the range extender at a place where it stays away from any electronic devices such as a cordless phone, microwave, etc. After you place the tp-link extender, you have to set it up by visiting the tplinkextender.net web address or tplinkrepeater.net URL.

Want to Learn More?

TP-Link Extender Setup

To start with, you need to ensure you have access to the internet. Range extenders like TP-LINK work by connecting to the router through a LAN Ethernet connection. Therefore, also make sure that you have those LAN cables with you.

When you have these basic things, you are ready to start with the setup process. Follow the steps:

Take an Ethernet cable to set up a wired connection between your TP-Link device and a computer. Connect its one end to the computer and another end to the LAN port of the TP-Link extender device.
Go to the “Network” under the control panel and assign your computer a static IP address.
Now, launch an Internet browser such as Mozilla Firefox or Microsoft Internet Explorer on your computer that is connected to the network. In the URL field of the browser, type the TP-Link default IP address. You can use 192.168.1.1 or 192.168.1.254 or 192.168.0.254.

Note: If you can’t access the login window using the IP address, try using the tplinkrepeater.net the default web address.

Now press Enter key and it will redirect you to the tp-link extender login page for tp linkextender.net login page.
When a login window appears, enter the default username and password in the respective fields.
Once done, click the login button to access the web-based management page of the TP-Link Wi-Fi extender device.
On the TP-link extender setup page, click on the Quick setup tab. Click on the wireless tab from the menu.
Now, select the TP-Link Wireless Range Extender from the drop down list in the Operation mode field. Click on the search button to search for your extender’s network.

Find and select the network name (SSID) of your TP-Link device from the list of available networks. Click connect and then click on the save button.
Next, select the ‘wireless security’ under the ‘Wireless’ section. Select an advanced security standard. The latest security encryption standard is WPA2-PSK/WPA-PSK and encryption AES.
Now, type ‘testtplink’ in the PSK password field and then save the changes. It is necessary for both router and extender to have the same security settings.
Your network is now ready to use.

STEPS FOR THE TP-LINK EXTENDER LOGIN

You don’t need internet to access the web-based interface of the TP-Link wireless range extender. You just need to connect to the network through either a wireless or wired method. It is highly recommended to use a wired or Ethernet cable to make connections between the Tp-Link device and your wireless device. Follow the easy steps to log into the TP-Link range extender:

Take an Ethernet cable to set up a wired connection between your TP-Link device and a computer. Connect its one end to the computer and another end to the LAN port of the Tplink extender.
Go to the “Network” under the control panel and assign your computer a static IP address.
Now, launch an Internet browser such as Mozilla Firefox or Microsoft Internet Explorer on your computer that is connected to the network. In the URL field of the browser, type the TP-Link default IP address. You can use 192.168.1.1 or 192.168.1.254 or 192.168.0.254. If you can’t access the login window using the IP address, try using the tplinkrepeater.net the default web address.
Hit Enter key and it will redirect you to the tp-link extender setup page.
When a login window displays, enter the default username and password in the respective fields. Once done, click the login button to access the web-based management page of the TP-Link Wi-Fi repeater.

Tplink Extender Setup via WPS button

You can use the WPS method to set up the TP-Link repeater if your current router supports the WPS. Setting up the TP-Link wireless range extender using the WPS button is quite easy. You can complete the tp-link extender setup using WPS in a few minutes. Follow the steps given below:

Place your TP-Link extender near the existing router.
Plug the power adapter in a power outlet and provide power to your Tplink extender.
Press the WPS button on your existing router and wait for the LED light to blink.
Next, locate and press the WPS button on the Tplink range extender immediately. It is recommended to press the TP-Link extender’s WPS button within two minutes after you press the WPS button on your router.
It will take a few minutes to establish a connection between the devices. The TP-Link repeater’s wireless signal LED light up after the successful establishment of the connection between the two.

Troubleshooting TP-Link Wifi Repeater Issues

If you are unable to access the tp-link extender setup page using the tplinkrepeater.net or tplinkextender.net, then follow the below troubleshooting tips:

Try connecting your computer directly to your range extender.
Try using the default IP address of your TP-Link range extender. If you do not know about the TP-Link IP address then check the DHCP list of the existing router.
Flush the local DNS cache to resolve the tplink login error.
Power cycle the router and TP-Link extender. Switch off both the devices and then turn them on again. Now, go to the ‘Start’ menu then all programs then accessories. Open the command prompt. You can directly open it by typing ‘cmd’ in the Run dialog box. Type ‘ipconfig’ in the command prompt window.

Check if you have entered the domain name that is tplinkextender.net or tplinkrepeater.net in the search bar of the browser window instead of the URL bar.
Enter the correct TP-Link domain name in the address bar of the browser.
Make sure to enter the correct username and password on the TP-Link admin page.
Restart your entire tp-link extender setup to proceed with the login process again.
Try resetting the TP-Link extender to the default settings by pressing the reset button on the device. Once done, reconfigure your device using the general setup steps.

If you have tried all the above solutions and still getting the same issue then contact our expert team. Our experts are available to help you 24/7. Our experts have experience of several years in the same field. You may get some other issues while setting up the TP-Link range extender. We will solve all your issues and provide a proper solution. Just contact us on our toll-free no. or do a live chat via a live chat window.